EMC ceitification exam E20-322

Get your latest IT exam passport at here:

Implemenation E20-340: Clariion solutiongs implementation

5. Using the Fibre Channel fan-in rule, what is the maximum number of storage systems a host can attach
to?
A. 2
B. 4
C. 8
D. 16
Answer: B

6. Which cable type is required to connect the DAE2P to the DAE3P?
A. HSSDC – HSSDC
B. HSSDC2 – HSSDC2
C. HSSDC – HSSDC2
D. HSSDC – HSSDC3
Answer: B

Get your latest IT exam passport at here:

Implemenation E20-340: Clariion solutiongs implementation

3.  After  the  initial  CX4  configuration  has  been  set  up  and  persisted,  a  customer  would  like  to  add
additional back-end and front-end ports. In the diagram, which logical port assignments will be given to
port 1 and port 3, respectively?
A. Port 1 – BE1, Port 3 – FE3
B. Port 1 – BE2, Port 3 – FE2
C. Port 1 – FE1, Port 3 – BE2
D. Port 1 – FE3, Port 3 – BE2
Answer: A

4. What is the hard-coded Ethernet IP address for a SP B service port in a CX3-20 and CX3-40?
A. 128.221.1.251
B. 128.122.2.251
C. 128.221.1.250
D. 128.122.2.250
Answer: A

Get your latest IT exam passport at here:

1. What is the maximum number of drives and LUNs supported by a CX3-40?
A. 240 drives and up to 1,024 LUNs
B. 256 drives and up to 1,024 LUNs
C. 480 drives and up to 2,048 LUNs
D. 512 drives and up to 4,096 LUNs
Answer: A

2. Which port is required at installation in order to configure a back-end bus on a CX4?
A. Port 0 A-Bus 0
B. Port 1 B-Bus 1
C. Port 0 A-Bus1
D. Port 3 B-Bus2
Answer: A