EMC ceitification exam E20-322

High quality and Value for the e20-510 Exam.

Testpassport Practice Exams for e20-510 (business continuity specialist exam) are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your e20-510 exam and get your Specialist Certification.

We guarantee your success in the first attempt. If you do not pass the Specialist e20-510 exam on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

TestPassport will help you to pass the e20-510 exam. TestPassport e20-510 contains 120 questions(2009-01-02), multiple choice answers.

The lastest subjects about EMC e20-510 Exam:

29. What is the state from a host’s perspective of an R1 and R2 SRDF pair when failed-over?

A. R1 is Not-Ready and R2 is Read/Write

B. R1 is Read/Write and R2 is Read/Write

C. R1 is Write-Disabled and R2 is Read/Write

D. R1 is Read/Write and R2 is Write-Disabled

Answer: C

30. What are the primary modes of operation for SRDF?

A. Synchronous or Adaptive Copy

B. Synchronous or Asynchronous

C. Asynchronous or Domino Mode

D. Synchronous or Semi-Synchronous

Answer: D

High quality and Value for the e20-510 Exam.

Testpassport Practice Exams for e20-510 (business continuity specialist exam) are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your e20-510 exam and get your Specialist Certification.

We guarantee your success in the first attempt. If you do not pass the Specialist e20-510 exam on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

TestPassport will help you to pass the e20-510 exam. TestPassport e20-510 contains 120 questions(2009-01-02), multiple choice answers.

The lastest subjects about EMC e20-510 Exam(without picture):

27. Click the Exhibit button.

In the SRDF/AR Single Hop scenario shown in the graphic, the Source site has become unavailable. At the time of failure, all BCV pairs were Split, and the Source R1-BCV to Target R2 synchronization was complete.

It is necessary to restart the application at the Target site, while maintaining an additional clean copy of the data in case of corruption during the restart procedure.

Order the steps to achieve the desired objective.

1. Wait for synchronization to complete and then Split the Target site R2 and BCV

2. Perform an incremental Establish from the Target site R2 to the BCV

3. Suspend RDF links and Write-enable the R2 devices

4. Import Volume Groups, mount Filesystems and restart application from the R2 devices

A. 1, 2, 3, 4

B. 3, 2, 1, 4

C. 3, 4, 2, 1

D. 4, 2, 1, 3

Answer: B

28. What is the order for an SRDF/A deltaset operation?

A. 1 – Capture, 2 – transmit, 3 – receive, 4 – apply

B. 1 – Send, 2 – receive, 3 – acknowledge, 4 – apply

C. 1 – Capture, 2 – send, 3 – apply, 4 – acknowledge

D. 1 – Send, 2 – acknowledge, 3 – apply, 4 – commit

Answer: A

High quality and Value for the e20-510 Exam.

Testpassport Practice Exams for e20-510 (business continuity specialist exam) are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your e20-510 exam and get your Specialist Certification.

We guarantee your success in the first attempt. If you do not pass the Specialist e20-510 exam on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

TestPassport will help you to pass the e20-510 exam. TestPassport e20-510 contains 120 questions(2009-01-02), multiple choice answers.

The lastest subjects about EMC e20-510 Exam(without picture):

27. Click the Exhibit button.

In the SRDF/AR Single Hop scenario shown in the graphic, the Source site has become unavailable. At the time of failure, all BCV pairs were Split, and the Source R1-BCV to Target R2 synchronization was complete.

It is necessary to restart the application at the Target site, while maintaining an additional clean copy of the data in case of corruption during the restart procedure.

Order the steps to achieve the desired objective.

1. Wait for synchronization to complete and then Split the Target site R2 and BCV

2. Perform an incremental Establish from the Target site R2 to the BCV

3. Suspend RDF links and Write-enable the R2 devices

4. Import Volume Groups, mount Filesystems and restart application from the R2 devices

A. 1, 2, 3, 4

B. 3, 2, 1, 4

C. 3, 4, 2, 1

D. 4, 2, 1, 3

Answer: B

High quality and Value for the e20-510 Exam.

Testpassport Practice Exams for e20-510 (business continuity specialist exam) are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your e20-510 exam and get your Specialist Certification.

We guarantee your success in the first attempt. If you do not pass the Specialist e20-510 exam on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

TestPassport will help you to pass the e20-510 exam. TestPassport e20-510 contains 120 questions(2009-01-02), multiple choice answers.

The lastest subjects about EMC e20-510 Exam:

25. What is the Recovery Point Objective in seconds, if the SRDF/A cycle time is 30 seconds?

A. 30

B. 60

C. 90

D. 120

Answer: B

26. Which storage arrays are supported by Replication Manager?

A. IBM ESS and CLARiiON

B. CLARiiON and Symmetrix

C. StorageWorks and CLARiiON

D. Hitachi Data Systems and Symmetrix

Answer: B

High quality and Value for the e20-510 Exam.

Testpassport Practice Exams for e20-510 (business continuity specialist exam) are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your e20-510 exam and get your Specialist Certification.

We guarantee your success in the first attempt. If you do not pass the Specialist e20-510 exam on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

TestPassport will help you to pass the e20-510 exam. TestPassport e20-510 contains 120 questions(2009-01-02), multiple choice answers.

The lastest subjects about EMC e20-510 Exam:

23. What is required to implement TimeFinder consistent splits?

A. Resource Pak

B. Symmetrix Access Control

C. Symmetrix Integration Utilities (SIU)

D. Enginuity Consistency Assist (ECA)

Answer: D

24. What is the maximum number of differential TimeFinder/Clone targets that a source device can support?

A. 2

B. 4

C. 8

D. 16

Answer: C

High quality and Value for the e20-510 Exam.

Testpassport Practice Exams for e20-510 (business continuity specialist exam) are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your e20-510 exam and get your Specialist Certification.

We guarantee your success in the first attempt. If you do not pass the Specialist e20-510 exam on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

TestPassport will help you to pass the e20-510 exam. TestPassport e20-510 contains 120 questions(2009-01-02), multiple choice answers.

The lastest subjects about EMC e20-510 Exam(without picture):

21. Click the Exhibit button.

Based on the output shown, which SRDF/A session will become inactive when the Cache allocated for SRDF/A is used up?

A. All

B. RaGrpNum_04

C. RaGrpNum_03

D. RaGrpNum_05

Answer: B

22. Which RDF Configuration State must be enabled to allow multiple RA Groups on a single RF port?

A. Switched

B. Dynamic

C. Concurrent

D. Concurrent Dynamic

Answer: A

High quality and Value for the e20-510 Exam.

Testpassport Practice Exams for e20-510 (business continuity specialist exam) are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your e20-510 exam and get your Specialist Certification.

We guarantee your success in the first attempt. If you do not pass the Specialist e20-510 exam on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

TestPassport will help you to pass the e20-510 exam. TestPassport e20-510 contains 120 questions(2009-01-02), multiple choice answers.

The lastest subjects about EMC e20-510 Exam:

20. In a Single Hop SRDF/AR setup, the following options have been set:

Cycle Time = 300

Delay Time = 200

Overflow = Next

The symreplicate session was started at time 0. The actual cycle time was 450 seconds. How many seconds after the start of the first cycle will the next cycle start?

A. 450

B. 600

C. 650

D. 900

Answer: D

High quality and Value for the e20-510 Exam.

Testpassport Practice Exams for e20-510 (business continuity specialist exam) are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your e20-510 exam and get your Specialist Certification.

We guarantee your success in the first attempt. If you do not pass the Specialist e20-510 exam on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

TestPassport will help you to pass the e20-510 exam. TestPassport e20-510 contains 120 questions(2009-01-02), multiple choice answers.

The lastest subjects about EMC e20-510 Exam:

18. On which host operating system does PowerPath NOT create pseudo device names?

A. AIX

B. Linux

C. HP-UX

D. Solaris

Answer: C

19. Which feature does EMC Replication Manager support?

A. Automates tape backup based user specified schedule

B. Provides full tape restore back to a Symmetrix Storage Array

C. Provides incremental establish and restore functionality on Centera Storage Arrays

D. Provides incremental establish and restore functionality on Symmetrix Storage Arrays

Answer: D

High quality and Value for the e20-510 Exam.

Testpassport Practice Exams for e20-510 (business continuity specialist exam) are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your e20-510 exam and get your Specialist Certification.

We guarantee your success in the first attempt. If you do not pass the Specialist e20-510 exam on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

TestPassport will help you to pass the e20-510 exam. TestPassport e20-510 contains 120 questions(2009-01-02), multiple choice answers.

The lastest subjects about EMC e20-510 Exam:

16. What happens when a TimeFinder/Clone is terminated?

A. Space is reclaimed from the Save device pool

B. An incremental restore can be performed from the target to the source

C. Source and target continue to have a relationship; the data on the target is lost

D. Relationship between source and target is ended. The data on the target device remains unchanged

Answer: D

17. What is the default load balancing policy for hosts connected to a third party storage array with unlicensed PowerPath software?

A. Adaptive

B. No redirect

C. Round robin

D. Basic failover

Answer: A

High quality and Value for the e20-510 Exam.

Testpassport Practice Exams for e20-510 (business continuity specialist exam) are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your e20-510 exam and get your Specialist Certification.

We guarantee your success in the first attempt. If you do not pass the Specialist e20-510 exam on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

TestPassport will help you to pass the e20-510 exam. TestPassport e20-510 contains 120 questions(2009-01-02), multiple choice answers.

The lastest subjects about EMC e20-510 Exam:

14. Which statement describes TimeFinder Multi-BCV?

A. Ability of a Standard to be established with more than one BCV at the same time

B. Ability of a BCV to be established with more than one Standard at the same time

C. Ability of a Standard to maintain incremental relationships with more than one BCV

D. Ability of a BCV to maintain incremental relationships with more than one Standard

Answer: C

15. What is the maximum number of TimeFinder/Mirror BCVs that can be concurrently established with a locally protected standard Symmetrix device?

A. 1

B. 2

C. 4

D. 8

Answer: B